First of all, I'll mention that there is a kit to elevate the draw inside of air filter for extra dusty conditions. Our Top dresser HDX D has it.
Today I'm moving the air filter box from under the dump bed to somewhere between the seats.
The old filter location attracts a lot of dust, and you have to clean the air filter often. Where mostly cart paths here and still it is an issue.
Holding it up in different locations.
Going to use ABS pipe 1.5"(inside) ridged and puncher proof and is not going to collapse with the extra distance. Mapping a route for pipe avoiding dump bed and any pinch points.
Drilling a test fitting .
had to go a little higher on the final fitting.
after mounting air box run lines in reverse starting off with a mechanical clamp.
using ABS glue fittings . test fitting and marking joints for gluing as I go
Mechanical clamp from hardware plumbing section.
Sanded and blew out all sections
little tic marks to line pipes up for gluing
All done. Clamp to original hose. and zip tie
One more to do. Less than $20 dollars
No comments:
Post a Comment