Friday, July 3, 2015

Nova Scotia Open (New Ashburn) 2015


New Ashburn was off to a shaky start coming out of an unusually long winter. as most course in this area suffered a little more winter kill than expected . Brian Gouthro (superintendent ) and crew managed to get the course back in game shape just in time for tournament .This past week I was asked if I'd like to help out setting up and trouble shooting equipment with my buddy Al ( mechanic ) .I was happy to get the opportunity to participate at the event again . 


 Outside the shop the lot is full of trailers needed for tournament and television crews .



Looking down #10 . #17 green behind where TV crew main building is set up .


Stands at #18


Approaching #18 green


Outside the shop door


We had to move this generator ....it was in the camera shot on #18 green 


Score board ...1 of many around the course 





Having two techs made quick work on setting up gear for next mow . Al had all the gear freshly ground a few days before we started .


Driving range tee and short game area .





A shot from service road of #2 fairway from mid area of #1 .


Weather is cooperating and course is knitting in very well and at a fast pace in the last few weeks .


Approaching #1 green 



Some of the crew past and present dropped what they were doing to help out . 

  

  
Fairways are cutting great .Actually everything is cutting great .  


Mr. Brooks ... (assistant At the New Ashburn) One for you buddy .


Coming to the end of another long day . Guys are doing a great job. Course is looking great.


 #9 fairway 


Looking back at #10 green and one of the 3 covered bridges .

   
Giant sponsor golf bag. 



New Ashburn 2015 Nova Scotia Open .


The big show is over . Last evening to on call and adjusting machines . They had great conditions for play and the weather cooperated for a change . 
Camera crews are packing up the gear and some towers are coming down . Great to see some of the guys but will be glad to be single shifting back at my home course . 
The Links at Brunello . 



Abraham Ancer Wins Nova Scotia Open

Abraham Ancer won the Nova Scotia Open on Sunday for his first Web.com Tour title, beating Bronson Burgoon with a birdie on the first hole of a playoff.
The 24-year-old Ancer became the tour's fifth Mexican winner, following Keoke Cotner, Esteban Toledo, Alex Aragon and Carlos Ortiz. Ancer was born in Texas and has dual citizenship.
Ancer and Burgoon each birdied the par-4 18th in regulation to finish at 13-under 271 on Ashburn's New Course.
Ancer earned $117,000 to jump from 39th to fourth on the money list with $192,945. The formerUniversity of Oklahoma player tied for second in the Brazil Champions in March.
Burgoon is winless on the tour. The 28-year-old former Texas A&M player made $$70,200 to go from 43rd to 17th with $142,575.
Jason Allred, Travis Bertoni and D.H. Lee tied for third at 12 under. Allred shot a 64, Bertoni had a 68, and Lee a 69.
Stuart Appleby closed with a 68 to tie for 36th at 6 under in his first start since surgery to repair a herniated disk. The nine-time PGA Tour winner made his first appearance on the second-tier tour since 1995.

Monday, June 15, 2015

JD 7400 A Screen and blower holder

I have been busy making items need for shop and equipment .The New Mig welder sure speed projects up . 
This project involved being able to service engine bay ,protection for operator , and easy access to a hand blower . 
Rough units spend most of their days out and about on the course during play . 
Pretty high priority to get screens on theses units and the 8800's . 
On the  7400A we are mounting hand blowers to help with clean up around the Tee areas .


Pretty easy making a couple of frames to set screens in to tac. 


Don't weld to ROPS . These are tacked on roof framing and zip tied to ROPS. Making a couple of hooks made blowers easy to access . I can still do regular service to the machine . Bonnet clears without any issues with the blower off.


Fairway Dew drag rack

Recently we had our fairway dew drag system fail . Chris gave the go ahead to see what I can come up with . Had to be gender friendly so anyone could go out and dew drag the fairways . 
Cut pieces of 1.5 tube stock . I went with 20 Ft. length in total.. 


Laid out the center section on scissor lift . I wound up cutting the hitch shaft at a 30 degree angle offset  to get it higher off the ground . 


  


Welding up brackets and home made hinges to get a trial version made for tomorrow .


There is a nice square tube mid section to run the square stock through on the TX running chains midway out to pull frame for support . The mid bar can stay on the gator . I'm using pins to hold them on the gator end ,on the pull bar the chains are  welded on . 


 Fold up. ....pin in.....throw the rope in the back and drive to the next fairway or across the bridges .Added some end caps incase they drag in a few areas on the course.



Tried it out knocking some clumps down . Worked pretty well . The true test will be tomorrow .Lots of factors to deal with , I'm sure there will be a dew drag rack 1.1 soon . LOL. A good starting point .


Home made  hinge


The plate dead centre of picture I added to offset the force on the bar while it's pulling .I will take the pressure off the hinge .




Chain directly welded to pull frame


Just wrapped the rope over the end and zip tied it then capped it with 3" elbows we had from irrigation stock .


Chain from pull bar is pined to mid framing of the TX gator . Convenient hole for the bar to go through .











After the first time out I also added these plate to keep it from rocking back and forth in transit .







Ready for paint .


Another picture of mid frame pin .




Looks pretty good all done .






















Officially Day 1 here at The Links at Brunello . The crew are doing a great  job staying ahead of play for their morning duties . A bit of a learning curve having had the course to them selves for so long .

Quit a few weeks running it and made a few alterations .Running strong a few dings and bends ,,,but still goes out daily now with no issues .

Also Made Golf Course  Industry Magazine .

Sweet !!!!

Check out Travels with Terry in This months Golf Course Industry Magazine .

http://www.golfcourseindustry.com/digital/201509/index.html 
http://www.golfcourseindustry.com/article/gci0915-golf-course-equipment-ideas-sept