Hold down clamp for reels with rear roller brush kits

I was having an issue trying to find a way to hold down the rear roller with brush kits  on my Bernhard 3000 Express Dual .

I had an old club car leave spring in the scrap pile . It is the perfect solution .With the spring action of the leave spring it makes for the perfect hold down clamp . 

Just measured the distance I needed and cut end off spring .Then adding a piece of 1/2"angle stock and welded in place at the right angle  . Makes for a great multi purpose rear reel hold down clamp .  

A little video of it in action . 

Water separator repair (Ball Picker)

Our Ball Picker took a hit right on one of the pressed in tubes .

There was enough material around hole to

Drill out and tap for 

a new 1/4 fitting .

During the winter service more guards were added to protect it from getting damaged again . 1/2 screen bolted to the inside of bonnet worked great .