Friday, August 5, 2011

Homemade loader bucket level gauge



Gone are the days where the supers or mechanic load staff up here . I used the same system that was on our old Massey that we use to have . I used a piece of rod and drilled out the center of a nut and welded to the rod end . I attached it to the bucket bracket in a way that it wouldn't be affected by the movement . On the top end i welded a piece of tubing and ran the rod through it . I then leveled the bucket and cut off the rod at the point where they meet . Now everyone looks like a pro scooping full loads .

No comments:

Post a Comment